Best Floor, Wall & Ceiling Waterproofing Services in Singapore
Stop water seepage, damp floor patches, ceiling leaks and wall stains fast — no hacking, no noise, minimal downtime. For HDB, condos and landed homes.
10+ Years Waterproofing Performance
We use Class 1 Nano Solution for Waterproofing, made in Canada where high-penetration nanoparticles sink deep into concrete, cement, and tiles for waterproofing durability.
How to Spot Water Leaks in Floors, Walls & Ceilings
Water doesn’t always pool right where the leak starts. Moisture can easily travel across concrete floors, move behind walls, and slip through ceiling gaps, showing up far away from the actual problem. Besides visible dripping and puddles, here are tell-tale signs to act on:
Floor Symptoms
- Water pooling on floor surfaces
- Damp, cold or discoloured tiles
- Loose, hollow or uneven tiles
- Mineral deposits or efflorescence (white powdery stains)
- Musty smell rising from flooring
Wall Symptoms
- Peeling or bubbling paint
- Damp patches or brown stains on walls
- Cracked plaster or render
- Mould and mildew growth
- Efflorescence on wall surfaces
Ceiling Symptoms
- Brown or yellowish ceiling stains
- Dripping sounds or actual drips
- Recurring damp spots that return after painting
- Water leaking down from the unit above
- Blistering or peeling ceiling paint
If you see these signs, it’s important to investigate and address the issue promptly. Waiting often leads to further property damage and mould.
Previous Contractor Didn't Fix the Leak? Here’s Why.
Over 40% of the waterproofing jobs we take on are actually correcting another contractor’s mistake.
Most quick fixes fail within 3 to 12 months because of three common mistakes:
1. Wrong Diagnosis & Surface Level Fixes
General contractors apply cheap sealants or waterproofing paint over the visible damp area without finding where the water is actually entering. Water can travel from roof slabs, external walls, floor joints or neighbouring units before surfacing elsewhere. We use moisture meter and visual inspection to trace the leak to its true source — no guessing games.
2. Lack of Waterproofing Understanding
Careless contractors often apply sealant over damp tiles which traps moisture underneath, causing the treatment to be ineffective. Proper surface preparation and understanding of how water moves is essential for a lasting repair. See how our advanced method works for durability.
3. Ignoring Joints, Cracks & Penetration Points
Water finds the weakest point. Skipping proper preparation of wall-floor joints, tile grout lines and expansion joints means the leak will simply return. We seal the full water entry path, not just the visible stain.
Get it fixed properly once and for all with Atlas Works, contact us to enquire at +65 8800 0567.
Waterproofing Engineered for A Full Peace of Mind
Absolutely No Hacking Needed
Nano-particles are over 1,000 times smaller than human hair. Our advanced nano waterproofing solution penetrates deep into microscopic pores and hairline cracks in your grout lines and concrete screed with no hacking needed.
Invisible Hydrophobic Barrier
Unlike other topcoat or surface waterproofing solution, our solution chemically bonds inside the substrate to form an invisible, liquid-repellent shield that prevents water from seeping through. No odour, 100% bio safe and family friendly.
Breathable Protection
Cheap sealants trap moisture like plastic wrap. Our nano-chemical shields water from getting in, while vapor can still freely evaporate. This permanently stops leaks while keeping your tiles intact, dry, and mold-free for over 10 years.
Nano Waterproofing vs. Traditional Tile Hacking
Traditional waterproofing relies on physical membranes laid under tiles or applied to walls, which degrade over time. Our advanced hydrophobic nano-infusion works at the microscopic level to seal leaks from above or inside the surface, without breaking a single tile or removing plaster.
| Feature | Nano Waterproofing | Traditional Waterproofing |
|---|---|---|
| Average Cost | $ (Save up to 70%) | $$$$ |
| Duration | 3 to 4 Hours | 3 to 5 Days |
| Noise & Dust | Zero Noise, Dust-Free | Extremely High Noise & Dust |
| Downtime | Ready same day (6 hours) | Out of service for up to 1 week |
| Surface Impact | Existing surface retained | Tiles, membrane removed |
| Performance | 10+ Years | 1 to 5 Years |
What Our Customers Say
Our 4 Step Nano Process
Most waterproofing fails because standard sealants only sit on top of your tiles — eventually peeling, cracking, and letting water back in.
At Atlas Works, we do things differently. We developed a 10+ year performance waterproofing method with a Class 1 Nano Solution, made in Canada for compliance and durability.
Frequently Asked Questions
Got questions about persistent floor, wall or ceiling leaks, failed past repairs, or HDB/MCST rules? Here are quick, honest answers to what Singapore homeowners ask us most.
Yes, once the nano-particles cross-link inside the concrete pores and grout lines, they form a permanent chemical bond that does not wash away or wear out under normal usage.
Yes. Our nano solution penetrates interior wall and ceiling substrates to block water that is entering from outside or from the unit above. Because it bonds chemically inside the substrate rather than forming a surface film, it works from the interior face without needing access to the external facade.
Water can travel far from its entry point. We use moisture meters and visual inspection to trace the leak path across floors, walls and ceilings before recommending a solution. This diagnostic-first approach is why our repairs last.
Yes. We handle waterproofing for HDB flats, private condos and landed properties, and we are familiar with MCST requirements for shared walls, ceilings and common areas.
Yes. The nano formula is 100% bio-safe, odourless and family-friendly. There are no fumes or harmful chemicals left behind after application.
Atlas Works is the accredited service provider for the most advanced nano-technology waterproofing from Canada.
Permanent water repellency, no more leaks:
Our nano-technology penetrates several millimeters inside the core of your walls and floors to create a permanent hydrophobic (water-repelling) surface that prevents water from seeping.
Mold and mildew prevention:
By preventing water from accumulating, our waterproofing also prevents the growth of mold and mildew.
No hacking and damage to surfaces:
Our waterproofing does not require any hacking or drilling or removing your original floors. It is compatible with cement, tiles, marble, wood and more.
Easy maintenance:
Nano-technology surfaces are easy to clean and maintain, as water and dirt cannot penetrate the surface.
Longest-lasting durability:
Nano-technology waterproofing can last for 10-20 years or more.
Peace of mind:
With our advanced nano-technology waterproofing, you can have peace of mind knowing that your home is protected from water damage and related issues.